Problems of Regeneration of Used Zinc Catalysts
Keywords:
zinc oxide, nitric acid, zinc nitric acid, sodium carbonate, zinc hydroxide carbonateAbstract
The results of studies on the regeneration of used zinc catalysts contain 70-75% zinc oxide. The influence of technological factors on the production of zinc oxide from used zinc catalysts with nitric acid has been investigated. Zinc extraction is observed at an acid rate of 120%, a nitric acid concentration of 30%, a process duration of 3 hours and a temperature of 95℃. From a zinc nitrate solution, zinc hydroxide carbonate was obtained by precipitation with an 18% sodium carbonate solution at a temperature of 65-70°C, pH medium (7.9-8.2), the duration of the process is 45 minutes. The resulting zinc hydroxide carbonate was dried at 120℃, 2 hours and calcined at 500℃, 5 hours until the zinc oxide was converted.










